3D-Metal-Printer FL300M Powder Bound Filament Printing

3D printing technology Fused Filament Fabrication (FFF)

Fuselab Patented Extruder Technology: EXTRUDER FL300M - some facts:

• Integrated motor: Extruder motor with internal filament feedthrough for a compact and lightweight design.
• Multi-contact feeder: Reliable filament feeding even for the most demanding materials like powder bound filaments.
  Heater Unit: Slim heater design for an unobstructed view. Internal nozzle geometry optimized for powder bound filaments.
• Dual Independent extruders
• Printing volume: 300mm x 300mm x 290mm (dual extruder) and 340mm x 300mm x 290mm (single extruder)

• Extruder technology: FuseLAB 3D patented rollerdrive technology
• Nozzle diameters: 0.2mm | 0.3mm | 0.4mm | 0.6mm | 0.8mm
• Max. extruder temperature: 300 °C
• Heated build platform: Max. temperature 110 °C
• Polyetherimide (PEI) top surface
• Layer height: 0.05-1mm
• Build chamber: Fully enclosed and passively heated up to 40 °C
• Electronics: 32bit 300Mhz motion controller with quad-core ARM SBC and Fuselab embedded Linux distribution
• Display: 7 inch TFT capacitive touch display
• Air filtration: HEPA + active carbon filter, fully closed with automatic pause when door opend
• Auto park extruders prevents accidental nozzle contact
• Heated bed: Redundant temperature sensors for overtemperature protection
• Filament diameter: 2.85mm
• Supported materials: Metal and ceramic powder bound filaments from all manufactures (open system)
• 316L stainless steel | 17-4 PH stainless steel | H13 | Zirconia SiC | Common Polymers (ABS, ASA, PLA, PETG, …) | and more

• Spool Size: Up to 2 spools of 300mm diameter and 100mm wide
• Power input: 100 – 240V AC / 6.5-2.7A AC / 50-60Hz / Max. 650 Watt
• Slicer software: Simplify 3D | Cura
• Connectivity: WiFi | Ethernet
• Data transfer: Wifi | Ethernet | USB stick
• External dimensions 648mm x 589mm x 1211mm (W x D x H)
• Weight approx. 90kg